Revision [31573]
This is an old revision of showProfileWindw() made by s243a on 2016-11-12 22:17:53.
1. configure a wireless profile:
2. select a wireless profile to connect with,
3. connect to a wireless network interface using a wireless profile.
This wizard only connects to the point of access of the wireless network (e.g. a router). For complete network setup and IP address must be assigned and if the network is an access point to the internet then a default gateway and nameserver also needs to be defined.
code
showProfileWindow is part of wag-profiles.sh located at:
/usr/sbin/wag-profiles.sh
it is lauched automatically if wag-profiles.sh is called from the command line but is not called by default if wag-profiles.sh is sourced as a function library. This function is usually called from Network Wizard ([[net-setup.sh]) when someone presses the wireless button on the, "Configure Network Interface window".
